XAVC to iMovie-Edit Sony PMW-F55/F5 XAVC files in iMovie on Mac

With the introduction of the new PMW-F5 and PMW-F55 4K cameras, Sony has started the roll-out of its new, more efficient, mid-range codec: XAVC. This has been designed for 4K, and will offer both intra frame and Long GoP options. It will also allow higher frame rate recording at 1080p.

The cameras will support four codecs: XAVC, for high frame rates and 4K, MPEG-2 at 50Mbps, MPEG4 SStP (Sony’s SR Master codec) and Raw 4K “by the switch of a button, depending on what job you want to do,” adds Olivier Bovis, Sony’s head of AV Media. XAVC is an extension of H.264, using the highest Level 5.2 of the standard, so it is very solid in terms of multi-generational support, he explains.

XAVC Converter for Mac, a powerful Sony XAVC to iMovie Converter software which is able to convert XAVC files to AIC, is not only a Sony PMW-F55/F5 XAVC to iMovie Converter, but also a various video format converter supports transcoding Sony XAVC to FCP Prores. With it, you can easily convert your footages in different formats to iMovie preferred formats smoothly. It also provides try-before-purchase service, click here to download a free trial version.

(Tip: Click Sony XAVC Converter to access a windows version if you are running Windows PC.)

How to convert Sony F55/F5 XAVC media to AIC for iMovie

Step 1. Install and launch the Pavtube Sony XAVC to AIC Converter for Mac, click "add videos" to load individual videos, or click "add from folder" to load the whole folder.



Step 2. Click "Format" preset and choose "iMovie and Final Cut Express-> Apple InterMediate Codec (AIC) (*.mov)" as best video format for editing Sony XAVC in iMovie as well as good video quality.



If you just want to convert this video for normal use and want it to be smaller in size, then Apple ProRess 422 (*.mov) is suggested.

You can also click "Settings" which is marked as step 3 to fix the frame rate, bitrate and video quality to your needs. (Refer to the page)

Step 3. now click "Convert" and let it go. The XAVC to AIC Converter for Mac supports batch conversion, so if you have lots of xavc videos to convert, check 'Shut down computer after conversion', and you can go away without keeping an eye on it.

Tips: When the conversion is finished, you can import the converted XAVC file to iMovie.

Related articles:

• How to Get off Tivo Recordings Copy Protection for Transferring to Computer?
• How to Convert MOV Files on Mac OS X El Capitan?
• Review: H.265 Converter for Mac OS X El Capitan
• Best Way to Edit Video Files on Mac OS X El Capitan
• Import Canon C300 Mark II 4K MXF to Premiere Pro CS6/5/4/3
• AVCHD to Avid Converter- Import Canon C100 Mark II AVCHD to Avid MC
• Alternative to GoPro Studio to Work with GoPro Hero Footage

Transcode/Import Nikon D4 MOV videos to iMovie for smoothly editing

Facing problems importing Nikon D4 MOV files into iMovie 11/09/08? Here you will find the fluid workflow for editing Nikon MOV footage with iMovie. 

Apple Intermediate Codec (AIC) would be the finest codec for iMovie editing, which truly can be a mov format. As we know, Nikon D4 record movies in MOV format, but these mov footage constantly in HD (1080p, 720p or 1080i ). And include diverse codec. These mov films can not be supported properly by iMovie. If you desire to edit Nikon D4 MOV recordings in iMovie, so as to get the top video good quality, you happen to be recommended to transcode MOV to AIC.AIC can be a video codec made to become an intermediate format in an HDV workflow.


There is a quick workaround for you to get iMovie ingest Nikon MOV files without any problems. By converting Nikon H.264 .mov to AIC encoded .mov files, the possible best quality will be retained in post-production workflow and you can then edit the resulting media files just as you would edit in QuickTime Movie format without rendering. The following guide tells you how to convert Nikon D4 MOV footage to AIC codec for use in your iMovie sequence.

Nikon h.264 MOV Converter is the best choice to help you transcode H.264 MOV to iMovie preferable AIC format fast. As a professional converter, Pavtube iMedia Converter for Mac is a recommendable Nikon H.264 MOV converter for iMovie to help you which is an all-in-one converter for dealing with your Blu-ray, DVD and Videos on Mac.

First free Download and install Pavtube iMedia Converter for Mac. This converter can help you transcode Nikon H.264 MOV video to iMovie, Final Cut Pro, FCE, etc.

1. Run this Nikon h.264 MOV to iMovie editor, import D4 h.264 MOV videos you want to transcode.

2. Click format bar to choose the format for output. For editing Nikon D4 H.264 MOV in iMovie on Mac, you can choose iMovie and Final Cut Express -> Apple InterMediate Codec (AIC)(*.mov), it's best for iMovie editing. If you want to customize it, you can click settings to use the parameters you want. And you can find the video editor button on the Column, it will help you on frame-by-frame trimming if you need.





3. Click "Converter" to start optimizing your D4 h.264 MOV to iMovie friendly format.

After a shot waiting, you can click "open" button to find the output files and import your D4 H.264 MOV into iMovie without optimizing process.

This Nikon h.264 MOV to iMovie converter can help you convert almost all the H.264 MOV videos from Nikon cameras. For instance, you can convert Nikon D3100 to iMovie, convert Nikon D7000 to iMoive, convert Nikon D300S/D90/D3200/D5100 to iMovie, etc. If you like, it will also help you convert Nikon H.264 Mov to FCP, AVID, Premiere format for editing. It's a compressive Nikon h.264 Video Converter.

Read More:

• Best 5 Video Converters for iMovie
• Import Sony RX10 II 4K XAVC S to iMovie for Editing
• Editing Phantom 4 4K with iMovie (iMovie 11 included)
• Solution for Importing Videos from Camera to iMovie (iMovie 11 Included)
• How to Save iMovie Project to Quicktime Movie?
• Convert and Import XviD/Divx to iMovie on Mac OS X (Including El Capitan)
• iMovie & M2TS Tutorial: import/convert M2TS to iMovie on Mac
• How to Edit Sony AZ1 1080/60p XAVC S in iMovie?

How do I transfer .ts files into Avid Media Composer for editing

The article explains how to get Avid Media Composer to work perfectly with AVCHD footage in .TS format by transcoding to DNxHD MOV files.


TS, short for Transport Stream, is a communications protocol for audio, video, and data. But TS is not a Avid-compatible format. So you must convert TS to Avid supported formats like DNxHD .mov. TS to a Avid Converter brings you the easiest, affordable way to import .ts movies into Avid accepted video.

With this TS files to Avid converter, it would be quite simple and easy for you to edit TS files in Avid . The article is a step by step guide, showing you how to convert TS to Avid on Mac. And in order to keep the excellent quality of the files, it employs a professional iMedia Converter for Mac to be the assistant which can also deal with your Blu-ray and DVD discs.

Simple steps to convert TS to Avid DNxHD .mov for editing .TS in Avid Media Composer on Mac

1.Add TS files to the program

With the Mac TS converter, you can directly drag & drop the TS files to the converter, or click "Add video" or "Add from folder" icon to locate the TS files you want to load.

2.Choose DHxHD MOV as output format

Select "Avid DHxHD (*.mov)" as target format under "Avid Media Composer" option. This optimal format would guarantee a great performance when editing in Avid MC.



3. TS to Avid Media Composer conversion on Mac OS X.

Hit "Convert" button and let this professional TS to Avid Converter do the rest for you!

After the TS files to Avid Media Composer, you can freely use your TS files on Avid Media Composer, The converter also works on MacBook, MacBook Pro, MacBook Air, iMac.

More features of TS Video Converter for Mac
 
1. By ticking off the checkbox before "Merge into one file" option, you can combine all the checked Panasonic MTS/M2TS clips into one file.

2. If you wanna customize the video and audio parameters, you can click "Settings" button to enter "Profile Settings" panel to modify video and audio settings like video resolution, bit rate, frame rate, sample rate, and audio channel.

3. The TS to Avid Converter provides customers with several simple editing functions, including cropping, trimming, deinterlacing, watermarking, adding special effects, and audio replacing, which help you do a fast and necessary editing on your .ts footage before importing them to Avid Media Composer.

Editor's Recommendations

• Can Final Cut Pro X Edit DJI Phantom 4K video?
• Import and Edit Sony A6300 4K XAVC S to Avid Media Composer
• Tapeless MTS Workflow with Final Cut Pro 7
• Premiere Pro CC 2015 can’t import MPEG2 files
• Importing Typhoon-H 4K videos to FCP X for editing
• Tips for Importing and Editing Canon 5D Mark IV 4K MOV with Avid MC
• Top 5 best MXF video converter for Mac
• Import Canon XC15 4K footages to Premiere Pro CC
• Import 4K video (MOV, MP4, MXF, XAVC, MTS) to Pinnacle Studio for editing
• GoPro Hero 5 4K to FCP X - Importing GoPro Hero 5 4K footages to FCP X
• How to edit H.265/HEVC files in Adobe Premiere Pro?
• Compress and Convert Samsung NX500 4K H.265 video to 1080p video

Solving problem with importing Sony XR500 MTS files in Final Cut Pro 7

Summary: Tutorial for Beginners, this article will tell you how to Make Sony HDR-XR500 AVCHD footages compatible with Final Cut Pro 7. You can transcode Sony NR-500AVCHD to ProRes MOV via AVCHD to ProRes Converter, then import the covnerted AVCHD files to Final Cut Pro 7 for editing on Mac.

Sony HDR-XR500 provides HD recording with 120GB HDD and 6-megapixel CMOS sensor. The HD videos are stored as AVCHD .mts, which is not the preferred compression for editing on FCP. The Apple Final Cut format is Pro Res footage.
After searching solutions for MTS to ProRes, I got the workaround with Pavtube MTS/M2TS Converter for Mac and the Apple Compressor, which comes with Final Cut. I convert the MTS files from Sony HDR-XR500 to the highest quality codec at same frame rate and size as the raw footage, and then output Pro Res with Apple Compressor. If you would also like to go further with detailed explanation, just keep reading.

Even though the above methods work for AVCHD videos,you may find 1080p .mts videos are not recognized/imported to FCP 7. At present, the most efficient way to play and edit your Sony HDR-XR500 AVCHD MTS files is re-encoding them to Mac friendly video format, like MOV for further playing and editing in FCP, FCE and iMovie. While looking for solutions to import Sony HDR-XR500 MTS/M2TS to Final Cut Pro 7 on Mac, I downloaded and tried several converters and found the Sony AVCHD to FCP 7 Converter works better for me.

Guide: Transcode Sony XR500 AVCHD to ProRes 422 MOV for smoothly editing in Final Cut Pro 7 on Mac Lion 10.8?

The best way is to convert Sony XR500 MTS/M2TS to FCP 7 best supported Apple RroRes codec. Now I will start with the step-by-step guide on how to convert Sony XR500 AVCHD to MOV and then import the converted videos for editing in Final Cut Pro 7.

Step 1: Download Sony AVCHD to Prores Converter, import your Sony XR500 AVCHD file.



Step 2: Click format column and choose the output format. You are recommended to choose Final Cut Pro -> Apple ProRes 422 (*.mov)


Tips: If you want the files to be in smaller size, you can follow Final Cut Pro > Apple ProRes 422(LT) (*mov)/Apple ProRes 422(*mov) option. If your files size is at SD levels, you are advised to choose "Final Cut Pro > Apple ProRes 422(Proxy)(*mov)".

Step 3: Setting the best video profile for Final Cut Pro 7.


Click "settings" button to adjust the output video's parameters, such as bitrate, resolution, etc.



Step 4: Hit "Convert" icon, start transcoding XR500 1080p AVCHD to ProRes 422 MOV for Final Cut Pro 6/7/X editing on Mac.

After the Sony AVCHD to FCP 7 conversion, import the converted MOV files to Final Cut Pro 7, then you can edit Sony XR500 AVCHD in FCP smoothly without rendering.

Read more: 

• Import AVCHD to Avid Media Composer to Solve Avid won’t Import AVCHD
• Easy Way to Get mts Videos from JVC Everio GZ-HM330SAA into FCP

Import Panasonic DVCPRO P2 MXF files to Sony Vegas Pro 11 without Raylight Ultra by DVFilm

The best workaround for ingesting and importingPanasonic DVCPRO P2 MXF files to Sony Vegas Pro 11 for smoothly editing without any audio and video problem.

Panasonic Camcorders such as AG-HVX200, AG-HPX300, etc are normally save as MXF files are usually known as P2 MXF file for short; however, the P2 MXF file is not naturally supported by some video editing software like Sony Vegas Pro 11, Windows Movie Maker, etc. When importing the P2 MXF files to these programs for editing, you probably will meet some troubles. Here we'd like to offer you some tips of how to import P2 MXF file to Sony Vegas Pro 11 for editing without any trouble.

Q:"I have a Panasonic DVCPRO P2 camcorder that records .MXF video format, now I would like to import these projects to Sony Vegas Pro 11 for editing. What I want is to edit MXF files smoothly without codec problems, what video codec should I use? Can you recommend some software which can help me import and convert MXF to Sony Vegas Pro 11 smoothly?"

Considering that there will be probably many other P2 camcorder users would encounter the similar trouble when importing the P2 MXF footage to Sony Vegas Pro 11 for editing, so we solve the trouble for you here.

One of the solutions is to purchase the Raylight Ultra plugin. With this, you can either edit your P2 footage directly in the Sony Vegas Pro 11 timeline or you can convert the P2 MXF files to AVI format with the software that Raylight comes with. While, for some users, they may feel that the Raylight Ultra is a bit expensive. Well, here we offer you the other option- to transcode P2 MXF to MOV/WMV for Sony Vegas Pro 11 with a 3rd party software.

Here we recommendIn order to edit your Panasonic DVCPRO P2 MXF in Sony Vegas Pro 11 smoothly, you should transcode MXF format to WMV format, which is best supported by Vegas Pro.

Pavtube Video Converter Ultimate is the best choice, I have used this tools for some time, and I also rewrap Canon MXF files to Premiere, this software can deal nearly all kinds of MXF videos, it can convert Panasonic DVCPRO P2 MXF files for Sony Vegas Pro 11 easily, that is to convert MXF video to WMV/MPG format, and then you can edit Panasonic DVCPRO P2 MXF files smoothly in Sony Vegas Pro 11. Just take a look at the brief guide below.

1. Download Pavtube Ultimate Converter, follow the prompts to install the program. Click "Add" to load Panasonic DVCPRO P2 MXF video files or directly drag the files into file list.

2. Click "Format" bar to determine output format. For smoothly editing in Vegas, you are recommended to choose Adobe Premiere/Sony Vegas -> WMV (VC-1) (*.wmv), this format is best for Sony Vegas Pro 11 editing.




3. If you would like to customize the video and audio parameters, you can click "settings", adjust the parameters as you want, like Video Codec, aspect ratio, bit rate, frame rate, Audio codec, sampling rate, bit rate, channels.

4. Click "Convert" to start to convert Panasonic DVCPRO P2 to Sony Vegas Pro 11.

With this Panasonic MXF to Sony Vegas Pro 11 converter, it becomes easy for you to convert P2 MXF video to Vegas Pro smoothly for editing.

Read More:

• MXF & FCP X Workflow: Help Importing MXF into FCP X
• Video Solution: Edit XDCAM MXF in Adobe Premiere Pro CC
• Import Panasonic HVX2000A MXF Files to Avid MC for Editing
• Import Canon C300 Mark II 4K MXF to iMovie on Mac
• Convert Panasonic AJ-HPX2700 P2 MXF to Avid/Premiere/Sony Vegas Pro
• How to Convert Camcorders MXF to any formats on Mac (macOS 10.12 Sierra included)

Frustration with iMovie and Canon G1X MOV transcoding

Canon PowerShot G1 X surprises the users with its ability to shoot spectacular 1080p full HD video with stereo sound that you can later watch on your HDTV or put to your computer to share with family and friends. In addition to be capable of shooting full HD 1080p video at 24 frames per second, the PowerShot G1 X digital camera can also shoot 720p HD video at 30 frames per second. The Full HD video, together with the professional level of images, makes the PowerShot G1 X the best choice for Canon lovers. The broght and compact camera seems the perfect one except the problem when you want to import Canon PowerShot G1 X 1080p MOV to iMovie on Mac for editing.


The reason that you can't edit G1X MOV videos in iMovie is canon G1X recorded videos are in MOV format, this format is not compatible well with iMovie and other editing software, iMovie best supported video format is Apple InterMediate Codec (AIC) MOV format, so if you want to edit G1X MOV video in iMovie smoothly, you’d better convert G1X MOV to AIC MOV for iMovie, you can follow the steps below to transcode G1X to iMovie AIC format, then you won't have any editing problems in iMovie.

1. Download Pavtube HD Video Converter for Mac, this Mac H.264 to AIC Codec Converter can help you convert G1X MOV to AIC codec for iMovie, more output formats are also supported, such as MKV/AVI/MP4/Apple ProRes, etc.

2. Run the professional Mac Canon MOV to iMovie Converter, import G1X MOV footages to this best AIC Converter for iMovie.

3. Click and choose the best output format, for editing G1X MOV in iMovie, you click and choose iMovie and Final Cut Express -> Apple InterMediate Codec(AIC) (*.mov), it's the best format for iMovie and Final Cut Express.



4. You can click settings button to customize output parameters as you want, such as codec, resolution, etc. it's good to keep the parameters as original.



5. Edit function is available to use in this G1X MOV iMovie Converter; you can trim, crop, add watermark or adjust effect to the Canon Powershot G1X MOV video.

6. Click "Convert" button to start, H.264 to AIC Converter will help you convert videos in a short time, and then you can import Canon G1X video to iMovie freely.

Pavtube HD Video Converter for Mac is an all-in-one bluray ripper for Mac, Mac DVD Ripper, and Video Converter for Mac. can convert 1080p cameras/camcorders footages to editable HD video formats for non-linear editing software like iMovie, Final Cut Express, Final Cut Pro, Final Cut Studio, Avid, Adobe Premiere etc. The HD footage can be compressed to SD video clips for storage when you wanna save storage space. The Mac iMedia Converter is also able to extract audios from Blu-ray discs, DVDs and videos for media players with high quality and fast conversion speed.

Read More:

• Best 5 Video Converters for iMovie
• Import Sony RX10 II 4K XAVC S to iMovie for Editing
• Editing Phantom 4 4K with iMovie (iMovie 11 included)
• Solution for Importing Videos from Camera to iMovie (iMovie 11 Included)
• How to Save iMovie Project to Quicktime Movie?
• Convert and Import XviD/Divx to iMovie on Mac OS X (Including El Capitan)
• iMovie & M2TS Tutorial: import/convert M2TS to iMovie on Mac
• How to Edit Sony AZ1 1080/60p XAVC S in iMovie?

Best solution to ingesting Sony NEX-F3 AVCHD files to iMovie on Mac

Sony's Alpha NEX-F3 is Sony's entry-level mirrorless interchangeable lens camera, it's the replacement to the NEX-C3, with the most significant change being a new 3-inch LCD that can flip upward 180 degrees and face your subject. Have you ever tried to edit the 1080/60p AVCHD videos, shot by Sony Alpha NEX-F3 Digital Camera, in iMovie? If so, you may have found that when you try to ingest 1080p Sony MTS to iMovie, you will get many AVCHD importing problems there and the reason is that 1080p AVCHD format can not be recognized by iMovie.

If you want to edit Sony NEX-F3 AVCHD in iMovie, you need to convert Sony NEX-F3 AVCHD MTS/M2TS to iMovie best supported video format, iMovie best supported video format is Apple InterMediate Codec(AIC) MOV format, you can follow the steps below then you can edit Sony NEX-F3 MTS/M2TS video in iMovie smoothly.

1. Download Pavtube MTS/M2TS Converter for Mac.This software can convert Sony NEX-F3 AVCHD video to iMovie or other common formats.


2. Install and run this Sony NEX-F3 AVCHD to AIC Converter.

3. Click format column to choose the output format for iMovie. Click and choose iMovie and Final Cut Express -> Apple InterMediate Codec (AIC) (*.mov), it's the best format for editing Sony NEX-F3 in iMovie.


4. You can click settings button to adjust output parameters, such as resolution and bitrate.

5. Click convert button to start.

The Sony NEX-F3 AVCHD Converter will convert MTS/M2TS for iMovie quickly. After conversion, you can edit Sony NEX-F3 AVCHD video in iMovie as you want.

With this Sony AVCHD to MOV Converter, you can also edit Sony NEX-F3 video in FCP

Read More:

• How to Solve the freezes when importing MTS media to Premiere CC-2015.3?
• How to Convert MTS/M2TS with Handbrake Easily?
• Best Solution to Play Sony MTS/M2TS Files on MacBook Pro
• Play MTS on Smart TV (Windows and Mac Solutions)
• Top 5 MTS/M2TS Video Editors for Mac
• Top 5 MTS/M2TS Video Editors for Windows (10, 8.1, 8, 7, XP, etc)
• Fix Choppy Issues When Importing AVCHD Files to FCP
• Join and Convert MTS/M2TS Files for playing with VLC Player
• How to Convert 3D AVCHD MTS to 3D Tablet for Watching?

Canon C300 Workflow- Import/Load Canon C300 MXF to FCP 6/7 or FCP X

Which one is the most popular and hotly-received professional camcorder last year in 2012? It is no doubt that the Canon EOS C300 will on the top of the list. The new Cinema EOS camera, together with 5D Mark III, has successfully attract attention with its far more compact and less cluttered design, although not the price. Its new supper 35mm CMOS, DIGIC DV III Image Processor and Fully Compatible with New & Existing EF-mount Lenses make it meet the demanding needs of cinema industry professionals.

You may have got this camcorder, but you may find it is difficult to use canon C300 MXF files when you want to edit MXF in FCP X on Mac, or just want to put C300 MXF on tablet for playback. MXF format is not a common video format, and it is not supported by many editing software like FCP X and iMovie on Mac, or Premiere on Windows. Below is a guide for you to convert C300 MXF to FCP X for editing.

1.  Download Pavtube MXF Converter for Mac, it's a good MXF converter on Mac/transfer MXF on Mac.


2. Install this C300 MXF to FCP X converter. Import the MXF files to the converter you want to convert.


3. Click format bar to choose output format. Click and choose Final Cut Pro -> Apple ProRes 422 (*.mov), it's the best format for editing in FCP X.

4. If you want to customize the output settings, you can click "settings" button to adjust the resolution, bitrate, etc.

5. You can click properties to adjust the audio stream ID if you find the C300 MXF no sound. Besides, you can click settings button to adjust the resolution, bitrate, etc. Just customize the parameters to meet your need.






5. Click convert button to start convert C300 MXF to FCP X.

With the excellent C300 MXF to FCP converter, you can use MXF files in FCP X on Mac as you want.

Read More:

• MXF & FCP X Workflow: Help Importing MXF into FCP X
• Video Solution: Edit XDCAM MXF in Adobe Premiere Pro CC
• Import Panasonic HVX2000A MXF Files to Avid MC for Editing
• Import Canon C300 Mark II 4K MXF to iMovie on Mac
• Convert Panasonic AJ-HPX2700 P2 MXF to Avid/Premiere/Sony Vegas Pro
• How to Convert Camcorders MXF to any formats on Mac (macOS 10.12 Sierra included)

Transcode/Edit Sony Alpha A57/A65/A77 AVCHD video to mov for Final Cut Pro on Mac

In this tutorial you are going to learn how to convert AVCHD Video from Sony Alpha A57/A65/A77 to FCP compatible formats for editing.
 
Nowdays, more and more cameras can record full HD 1080 60p AVCHD files. If you'eve recorded your ideas or memory into HD videos with Sony A57/A65/A77, you may also want to edit those AVCHD mts files in Adobe Premiere. But you may encounter some problems when you want to import Sony A57/A65 footages to FCP for editing, like import it slowly, and couldn't edit videos smoothly.

The reason you can't edit Sony AVCHD MTS files in FCP smoothly is that AVCHD MTS/M2TS files are not well supported by FCP on Mac due to the unfriendly codec, you can't edit the videos smoothly in Final Cut Pro. The best solution is to convert Sony A57/A65/A77 AVCHD MTS/M2TS to FCP best supported Apple RroRes codec.

• Required Software:Pavtube MTS/M2TS Converter - a top Sony AVCHD Converter for FCP

Now I will start with the step-by-step guide on how to convert Sony A57/A65/A77 AVCHD 1080/60p MTS/M2TS to ProRes 422 and then import the converted videos for editing in Final Cut Pro.

Step1: Download Pavtube HD Video Converter for Mac and import your Sony A57/A65/A77 AVCHD file.

Step2: Click format column and choose the output format. You are recommended to choose Final Cut Pro -> Apple ProRes 422 (*.mov)

Tips: If you want the files to be in smaller size, you can follow Final Cut Pro > Apple ProRes 422(LT) (*mov)/Apple ProRes 422(*mov) option. If your files size is at SD levels, you are advised to choose Final Cut Pro>Apple ProRes 422(Proxy)(*mov).

Step3: Click settings button to adjust the output video's parameters, such as bitrate, resolution, etc.



Step4: Start converting Sony A57/A65/A77 1080/60p MTS/M2TS videos to Apple ProRes for Final Cut Pro 6/7/X

After the Sony A57/A65/A77 AVCHD to FCP conversion, import the converted MOV files to Final Cut Pro, then you can edit Sony A57/A65/A77 videos in FCP smoothly.

You can also convert Sony A57/A65/A77 AVCHD to best editing codec for iMovie/Premiere Pro on Mac. Just enjoy your HD videos from Sony A57/A65/A77 in your FCP now! Good luck to you!

Editor's Recommendations

• Can Final Cut Pro X Edit DJI Phantom 4K video?
• Import and Edit Sony A6300 4K XAVC S to Avid Media Composer
• Tapeless MTS Workflow with Final Cut Pro 7
• Premiere Pro CC 2015 can’t import MPEG2 files
• Importing Typhoon-H 4K videos to FCP X for editing
• Tips for Importing and Editing Canon 5D Mark IV 4K MOV with Avid MC
• Top 5 best MXF video converter for Mac
• Import Canon XC15 4K footages to Premiere Pro CC
• Import 4K video (MOV, MP4, MXF, XAVC, MTS) to Pinnacle Studio for editing
• GoPro Hero 5 4K to FCP X - Importing GoPro Hero 5 4K footages to FCP X
• How to edit H.265/HEVC files in Adobe Premiere Pro?
• Compress and Convert Samsung NX500 4K H.265 video to 1080p video

Nikon D800E to FCP Importing Tips-Smoothly edit Nikon D800 h.264 videos in Final Cut Pro

The D800E is designed to stimulate cinematographers to explore different moods and perspectives by enabling Full HD and HD video recording in two frame formats; Nikon FX- and DX-based movie formats in just one camera. By using the B frame data compression method, you can record 1080p Full HD video at 30p in H.264/MPEG-4 AVC format with unmatched moving image integrity for up to 29 min. 59 seconds of recording in a single clip.

"Just shot some footage with the Nikon D800E, I haven’t shot or edited HD before now, so need some help setting up the project, understanding about transcoding, exporting etc. This is also my first time shooting with a DSLR camera. The footage itself looks great. Problem is editing a sequence in FCP. I've read different things online regarding importing the D800E directly into FCP. Do I need to transcode the D800E files using ProRes or something else? And if so, how?"

This question is asked by a Nikon user, if you have used nikon D800E camera recorded many 1080P footages, you may want to import Nikon D800E video to FCP X/6/7 for editing. If you have got the D800E and often use it to record 1080P video, you may have the need to edit D800E MOV in Final Cut Pro on Mac, but FCP X best supported video format is Apple ProRes 422 codec MOV format, so FCP X doesn't support Nikon D800E MOV footages well. The best method to solve this problem is to convert D800E MOV footage to ProRes for editing in Final Cut Pro X, you can follow the steps below to transcode D800E MOV to FCP X for editing.

1. Download Pavtube Mac Nikon h.264 MOV Converter. This professional HD Video Converter can help you convert D800E MOV files to ProRes 422 MOV format for Final Cut Pro, more output formats are also supported.

2. Install and launch this D800E MOV Converter. Import Nikon D800E footage to the converter.


3. Click format bar to choose the output format. Click and choose Final Cut Pro -> Apple ProRes 422 (*.mov).


4. You can click "settings" to customize the output parameters, adjust the resolution, bitrate as you want.


5. Click convert button to start.

With this D800E MOV to Apple ProRes 422 converter, you can easily change D800E files to FCP X for editing, this software runs fast, so you can convert your D800E footages to FCP in less time.
Tips:

Before you try to do the conversion, if you are also a FCP X user, please make sure that you have installed the Apple ProRes Codec manually since the FCP X asks users to install it by themselves.

This Mac Nikon MOV Video Converter can alson convert videos to iMovie, Premiere Pro,FCE and Avid with good quality.

And you can get more info about how to import video to FCP (x) on pavtube website.

Editor's Recommendations

• Can Final Cut Pro X Edit DJI Phantom 4K video?
• Import and Edit Sony A6300 4K XAVC S to Avid Media Composer
• Tapeless MTS Workflow with Final Cut Pro 7
• Premiere Pro CC 2015 can’t import MPEG2 files
• Importing Typhoon-H 4K videos to FCP X for editing
• Tips for Importing and Editing Canon 5D Mark IV 4K MOV with Avid MC
• Top 5 best MXF video converter for Mac
• Import Canon XC15 4K footages to Premiere Pro CC
• Import 4K video (MOV, MP4, MXF, XAVC, MTS) to Pinnacle Studio for editing
• GoPro Hero 5 4K to FCP X - Importing GoPro Hero 5 4K footages to FCP X
• How to edit H.265/HEVC files in Adobe Premiere Pro?
• Compress and Convert Samsung NX500 4K H.265 video to 1080p video

Fast Convert/import Canon XF100 1080p MXF to AIC MOV for iMovie

Canon XF100 makes use of Canon's XF codec-a file-based MPEG-2 compression with MXF file wrapper. It can record content with 1080/60i/30p/24p or 720/60p/30p/24p at a constant bitrate of 50Mbps for high color resolution of HDV. You can capture many interesting videos with Canon XF100.

Everything goes perfect until you try to edit Canon XF100 .mxf file in iMovie. Fail in import the MXF file into iMovie, though you can see the disk on the desktop and can play the files in the Canon plug-in after connecting the XF100 to Mac. Why does it happen? The answer is MXF file format incompatibility with iMovie (even iMovie'11).

To import XF100 MXF files into iMovie for editing, the best way is converting MXF to iMovie recongnized video formats like AIC .mov. Mac Canon MXF Converter is your best choice to convert MXF to iMovie on Mac.

With Mac XF100 MXF to AIC MOV Converter, you can keep the highest video quality for editing. In addition, you can also convert MXF to Prores for FCP, DNxHD MOV for Avid,AVC MOV for Premiere Pro or other popular video formats like WMV, AVI, MKV, FLV, 3GP, MPG, etc on Mac and edit videos like cropping videos, adding watermark, trimming videos, merging videos.

Step 1. After downloading, install and run this best Canon MXF to iMovie Converter for Mac, just copy the MXF files from the CF cards right to your hard drive, import the files to the software.



Step 2. Click "Format" bar to choose the output format.

Click format bar to choose the output format, for editing Canon MXF files on iMovie, you can choose iMovie-> Apple InterMediate Codec (AIC) (*.mov).



Step 3. You can click Settings button to adjust the output parameters such as resolution and bitrate, you can also keep it as original.


Step 4. Click convert button to start converting Canon XF100 MXF to AIC for iMovie.

Pavtube MXF to iMovie converter can convert Canon MXF footages quickly, after conversion, you can use converted files in iMovie smoothly, just have a try.

Make incompatible Canon Vixia AVCHD MTS files work with FCP on Mac

Canon Vixia AVCHD Camcorders use AVCHD to record video as the following Vixia models: Canon Vixia HF S30, Vixia HF S21, Vixia HF S20, Vixia HF S200, HF M31, Vixia HF M30, Vixia HF M300, HF R11, Vixia HF R10, Vixia HF R100 (SDHC), Vixia HF S10, Vixia HF S100, Vixia HF20, Vixia HF200, Vixia HF S1,Canon VIXIA HF10.

These camcorders only record in high definition format using a special codec (compression/decompression) called AVCHD. This new codec is revolutionary for it's ability to compress very high quality HD video in a relatively very small space. Final Cut Pro (FCP) has gained the favor of many professional users including Hollywood film makers. But it only takes QuickTime and iMovie compatible video formats such as QuickTime MOV, QuickTime MP4, DV, HDV etc. Therefore, you are unable to transfer Canon Vixia AVCHD into Final Cut Pro and edit Canon Vixia video with FCP.

Now please follow the steps below to convert incompatible Canon Vixia AVCHD videos to FCP workable Apple ProRes files keeping the original video quality.

Step 1. Run the perfect Mac Canon MTS Converter , and click the "Add file" button to load the Canon Vixia videos to it.



2. Step 2. Click on Format > Final Cut Pro > Apple ProRes 422(HD) (*.mov) as the export to keep HD video for Final Cut Pro. Afterwards, you can set the output profile as you want.


3. You can click the Settings icon to do some audio/video settings. We recommend 1920*1080 as video size and 30fps as video bitrate for easier editing on Mac. If you are in PAL(50p) area, you are recommended 25fps as video bitrate.



Tip: Deinterlace Canon Vixia 1080i AVCHD

Click the "Editor" button, go to the Effect tab, and make sure the checkbox for Deinterlacing is ticked. The converter will remove interlacing artifacts from 1080i AVCHD videos perfectly.

4. Step 4. Click the "convert" button, and the Mac AVCHD to ProRes Converter will start transcoding Canon Vixia AVCHD to ProRes for FCP on Mac OS X immediately. Then you can get the resulted videos from output folder easily for importing and editing in FCP.

Tips: 

This Mac AVCHD MTS Converter is also compatible with other Mac Non-linear editing system like Final Cut Express, Avid Media Composer, iMovie, Roxio Toast, etc to import the AVCHD footages on Mac without incompatibility problems. You can get more info about how to edit Canon Vixia AVCHD MTS in iMovie.

Read More:

• How to Solve the freezes when importing MTS media to Premiere CC-2015.3?
• How to Convert MTS/M2TS with Handbrake Easily?
• Best Solution to Play Sony MTS/M2TS Files on MacBook Pro
• Play MTS on Smart TV (Windows and Mac Solutions)
• Top 5 MTS/M2TS Video Editors for Mac
• Top 5 MTS/M2TS Video Editors for Windows (10, 8.1, 8, 7, XP, etc)
• Fix Choppy Issues When Importing AVCHD Files to FCP
• Join and Convert MTS/M2TS Files for playing with VLC Player
• How to Convert 3D AVCHD MTS to 3D Tablet for Watching?

The way watching and enjoying 3D AVCHD on PC and Mac

Nowadays 3D camcorders are becoming cheap and popular, many people take a Sony or Panasonic camcorder to record beautiful moments which in 3D. It gives us wonderful enjoyment. But for most of us, 3D camcorders record unusual AVCHD 3D videos may be new to us.



You may have got a 3D camcorder which record AVCHD videos, because Sony and Panasonic camcorders mainly use AVCHD as the recording video format. After recording, you may want to convert 3D AVCHD to MP4 or AVI format for playback or editing, at this time, you need a 3D AVCHD to MP4/AVI converter, or a anaglyphic 3D converter to convert recorded 3D files, Pavtube MTS Converter can help you, it has added 3D conversion feature, below is a brief guide for you to convert 3D AVCHD video to AVI/MP4 format.

1. Download and install Pavtube MTS Converter for Mac, it's an excellent 3D AVCHD converter for any player watch 3D.

2. Run this 3D AVCHD to MP4/AVI converter, import the 3D AVCHD files to the software.

3. Click format bar to choose output format, just click and choose HD Video -> H.264 HD Video (*.mp4).

4. You can click settings button to adjust the output parameters as you want, adjust the video codec, resolution or audio parameters.



5. Click convert button to start.

After converting the 3D AVCHD videos to MP4/AVI format, you can watch 3D AVCHD on PC with red and blue anaglyph glasses. The software supports many 3D camcorders, for example, it can convert Sony AVCHD video, convert JVC 3D video, convert Panasonic 3D video, etc. Now just download this 3D AVCHD to MP4/AVI converter and have a try, hope it can help you get better video enjoyment.

• About AVCHD 3D:

AVCHD now supports a true 3D mode. Panasonic started shipping 3D cameras using 'side by side' encoding in 2010 and Sony joined the 3D race in March 2011 with Full HD 3D which means two video channels are used. The Sony approach uses a 50i or 60i video stream capturing 25 or 30 interlaced frames per second, per side.

Related Articles:

• How To Watch 3D Blu-Ray With Google Daydream VR?
• Rip 3D Blu-Ray Disc To 3D SBS MP4 For VR Headsets/3D TVs
• Make 3D SBS MP4 Video For Homido VR
• Converting 3D TiVo recordings for Watching on Oculus Rift CV1/DK2
• Convert 3D MKV/FLV/MTS/ISO to 3D MP4 for Google Daydream VR
• Convert 2D Blu-ray to MP4 SBS 3D Video for Samsung 3D TV 
• How to Watch 3D ISO to Samsung TV?
• Can you Watch 3D Blu-ray on HTC Vive?